TL heating cable incorporates a special metal heating element that reduces its resistance as temperature rises giving the cable a temperature limiting quality thus saving energy, protecting plastic pipes, limiting process temperature and allowing the cable to be overlapped during installation. Lowering the cable surface temperature extends cable life. The cable is specifically designed to be submerged in the water or process and is approved for use in contact with potable water.
CW heating cable incorporates a constant wattage metal heating element that provides a cost effective submersible freeze protection system for metal pipes, low wattage plastic pipe applications, commercial drain, and waste sewer out-fall. Featuring zero inrush at start-up, low energy cost, most rugged and flexible, field cut to length the cable is specifically designed to be installed outside the pipe or submerged in the water or process and is approved for use in contact with potable water.
EL surface heating cable incorporates a superior metal heating element and thermoplastic inner jacket covered with a Tefzel water proof outer jacket making it an excellent choice for roof, gutter, downspouts and general service tank and pipeline freeze protection. This cable is specifically designed for wet or dry application.
Yellow Jacket submersible heaters incorporates a special material and a heating element that reduces its resistance as temperature rises giving the heater a temperature limiting quality. This allows the heater to be used in metal as well as plastic vessels, tanks and Arctic vent freeze protection. The flexible design of this heater allows for any length and wattage output as may be demanded by the application. the heater may operate fully or partly submerge in water as the site conditions may change with no adverse affect.
HST series heated tube bundles our custom designed for each application. Used for heated sample lines in emissions monitoring, gas sample conditioning, and viscosity control for liquid process application. This heater is manufactured to your material and temperature specification and may include temperature control components such as RTS's, Thermocouples, and process controllers as may be required.